Tunnels & Underground Structures.png

How GEL Instrumentation Helps You Monitor Tunnels & Underground Structures

GEL Instrumentation helps you track changes in ground, groundwater and structural behaviour beyond what is visible from the work face, during tunnelling and underground construction. A coordinated monitoring system provides evidence of how ground and structures respond as excavation and construction progress. This helps project teams understand changing conditions throughout the work.

With Inclinometers and displacement sensors you can measure ground and lining movement, while strain gauges monitor structural response where required. Piezometers track groundwater conditions, and extensometer systems measure convergence and displacement. Data acquisition, telemetry and Convue can bring these measurements together for frequent remote monitoring.

The objective is not simply to collect more monitoring data. It is to provide timely evidence that helps teams compare actual behaviour against expectations and recognise developing trends. Monitoring information can then support response planning in accordance with the project's monitoring requirements.

FAQs

  • How do we measure convergence in a tunnel?
    Convergence meters within the Displacement Transducers family measure the change in distance across the opening, installed at sections set by the monitoring plan. Tape extensometers cover periodic manual measurement where automation is not required. Section spacing follows ground conditions and the excavation sequence.
  • It shows how much load the primary support is actually carrying. NATM style cells within the Pressure Cells family are embedded in the lining, so stress developing in the shotcrete is measured rather than inferred from ground behaviour. They are usually installed alongside strain measurement in the reinforcement.
  • Before the face reaches the section, wherever access allows. Installing and baselining ahead of excavation captures the ground response as it develops, which is the part that matters. We plan installation around the excavation sequence and the access windows available in an active heading.
  • Yes. In-Place Inclinometers installed from the surface measure ground movement with depth above and beside the alignment, which suits monitoring settlement risk to overlying assets. Extensometers add deformation measurement between specific horizons.
  • Through automated acquisition and telemetry. Loggers read the instrumentation at the interval set for the construction stage, and Convue, our monitoring software and data platform, lets your engineers compare convergence against predicted behaviour while the face is still advancing.

Discuss Your Tunnels & Underground Structures With GEL Instrumentation Engineer

Tell us the tunnel, the ground conditions and what the monitoring plan requires. Our engineers will configure the instrumentation and the data around it.