Mining Monitoring.png

How GEL Instrumentation Monitors Mining & Resources

Mining environments can change across surface and underground operations, requiring visibility of ground and infrastructure conditions. GEL Instrumentation combines fit-for-purpose instrumentation, data acquisition and remote monitoring around site conditions and operational requirements. Typical monitoring includes ground deformation, slope movement, groundwater, pore pressure, underground convergence, structural strain, load and settlement.

GEL develops equipment for specific mining monitoring applications. The Model 300 Intrinsically Safe Extensometer Readout and Model 404 Intrinsically Safe Vibrating Wire Readout Box support monitoring in hazardous underground areas. The GEL Series Roof Extensometer supports strata monitoring, while the GNSS Displacement Monitoring System provides surface movement monitoring.

Remote mine sites can present challenges with power and network access. GEL can configure data loggers, telemetry, solar or remote power and system integration around site conditions. Convue dashboards and alerts support remote access alongside manual or automated monitoring. Installation, commissioning and ongoing system maintenance can support the network after setup.

FAQs

  • What does intrinsically safe mean for underground readouts?
    It means the instrument is built so it cannot release enough energy to ignite a hazardous atmosphere. GEL's Intrinsically Safe Readouts are intended for hazardous underground areas. Site hazardous-area classification must be confirmed for your specific application before suitability is stated.
  • It depends on the horizons you need to separate. The GEL Roof Extensometer is a multi-anchor system, so movement is resolved between the immediate roof and higher strata rather than reported as a single number. Anchor depths follow the strata sequence and the ground control plan.
  • Yes. Instrumented rockbolt variants within the Load Cells family carry vibrating wire strain measurement inside the bolt, so load developing in the support is measured rather than estimated. This suits sections where ground behaviour is being assessed against the support design.
  • GNSS Displacement Monitoring measures absolute three-dimensional movement across pit walls, waste dumps and surface infrastructure. It continues through conditions that stop survey campaigns, and it is not constrained by line of sight. Point locations, expected movement rate and required accuracy drive the configuration.
  • With solar or battery power and a telemetry path suited to the location. Data loggers can be configured with radio, cellular or satellite communications depending on coverage, and readings feed Convue so site-wide data reaches your ground control team daily.

Talk to a GEL Instrumentation Engineer About Your Mining Project

Surface or underground, tell us what needs monitoring and the site conditions. Our engineers will work through instrumentation, power and communications with you.