Monitoring System Design.png

System Design & Engineering

GEL Instrumentation starts with what needs to be measured, how often, and who needs access. Site constraints affecting installation, power and communications are considered from the outset. Our engineers set instrument types, locations and reading frequencies with your team.

Instruments, data acquisition, communications, power and Convue are designed as one system rather than assembled later. GEOKON and selected Campbell Scientific equipment sit comfortably inside a GEL Instrumentation design, and a different logger can be configured in where a project calls for it.

What This Covers : 

  • Monitoring system design: Measurement objectives, instrument selection, locations, ranges and reading frequencies.

  • Data acquisition design: Manual or automated collection, channel count, sampling and logger selection.

  • Communications and power design: Telemetry, network coverage, remote access, redundancy, mains, battery and solar.

  • System integration and automation: Multiplexers, interfaces, enclosures, data formatting and the path into Convue.

Key Benefits

  • Site specific instrument selection

  • Baseline and threshold recommendations

  • Support for your compliance and reporting obligations

  • Integration with instruments and systems already on site

Why Choose GEL Instrumentation

One Connected Team.svg

One Connected Team

GEL Instrumentation coordinates supply, installation, integration, monitoring and software through one technical team, reducing supplier handoffs.

Technology Matched to the Project.svg

Technology Matched to the Project

Technology selected around the measurement objective and the site constraints, rather than forcing one product onto every problem.

Complete Solutions From Design to Data.svg

Complete Solutions: Design to Data

System design, supply, installation, commissioning, monitoring, data and ongoing support, handled by one team from end to end.

30+ Years of Monitoring Experience.svg

30+ Years of Monitoring Experience

Since 1993, supporting geotechnical and infrastructure monitoring projects across Australia.

Frequently Asked Questions

  • What does a monitoring system design include?
    A monitoring system design sets out what will be measured, with which instruments, at what locations, how often, and how the data reaches the people who need it. That means instrument type, range and accuracy, installation method, channel count and sampling rate, communications and power, and the dashboard, alert and reporting configuration. GEL Instrumentation treats all of these as one design rather than separate purchases.
  • Monitoring design should start before the instruments are ordered and well before site works begin. Instrument locations often depend on the construction sequence, and power and communications frequently need lead time or permissions. Designing early also allows baseline readings to be taken before the activity you intend to monitor actually starts, which is what makes later readings meaningful.
  • Yes. Where existing instruments remain serviceable, they can usually be brought into a new design rather than replaced. We review what is installed, how each component is performing, and what can connect to updated data acquisition, telemetry and Convue. Systems containing instruments from several sources can often be integrated into one monitoring workflow.
  • No. Instrument and logger selection follows the measurement objective and the site constraints. GEOKON instrumentation and selected Campbell Scientific data loggers are commonly used in GEL Instrumentation designs, but where a project requires a different logger or communications approach the system is configured around that requirement instead.
  • Thresholds and baselines are set with your geotechnical or engineering team against the project's own design assumptions and risk criteria. GEL Instrumentation can recommend sensible starting points based on the instrument type and the application, but the final values belong with the engineer responsible for the asset. Baselines are then captured at commissioning so later readings have a known reference.

Plan Your Monitoring System With Our Engineers

Send us the monitoring objectives and the site constraints. Our engineers will work through the instrumentation, acquisition, communications and power as one design.